Archive for January, 2003

Active FTP vs Passive FTP

Posted on January 21, 2003. Filed under: Computer Science, Perl, Services |

In active mode FTP the client connects from a random unprivileged port (N > 1023) to the FTP server’s command port, port 21. Then, the client starts listening to port N+1 and sends the FTP command PORT N+1 to the FTP server. The server will then connect back to the client’s specified data port from its local data port, which is port 20.

From the server-side firewall’s standpoint, to support active mode FTP the following communication channels need to be opened:

• FTP server’s port 21 from anywhere (Client initiates connection)
• FTP server’s port 21 to ports > 1023 (Server responds to client’s control port)
• FTP server’s port 20 to ports > 1023 (Server initiates data connection to client’s data port)
• FTP server’s port 20 from ports > 1023 (Client sends ACKs to server’s data port)

When drawn out, the connection appears as follows:

 

 

In step 1, the client’s command port contacts the server’s command port and sends the command PORT 1027. The server then sends an ACK back to the client’s command port in step 2. In step 3 the server initiates a connection on its local data port to the data port the client specified earlier. Finally, the client sends an ACK back as shown in step 4.

The main problem with active mode FTP actually falls on the client side. The FTP client doesn’t make the actual connection to the data port of the server–it simply tells the server what port it is listening on and the server connects back to the specified port on the client. From the client side firewall this appears to be an outside system initiating a connection to an internal client–something that is usually blocked.

 

In order to resolve the issue of the server initiating the connection to the client a different method for FTP connections was developed. This was known as passive mode, or PASV, after the command used by the client to tell the server it is in passive mode.

In passive mode FTP the client initiates both connections to the server, solving the problem of firewalls filtering the incoming data port connection to the client from the server. When opening an FTP connection, the client opens two random unprivileged ports locally (N > 1023 and N+1). The first port contacts the server on port 21, but instead of then issuing a PORT command and allowing the server to connect back to its data port, the client will issue the PASV command. The result of this is that the server then opens a random unprivileged port (P > 1023) and sends the PORT P command back to the client. The client then initiates the connection from port N+1 to port P on the server to transfer data.

From the server-side firewall’s standpoint, to support passive mode FTP the following communication channels need to be opened:

• FTP server’s port 21 from anywhere (Client initiates connection)
• FTP server’s port 21 to ports > 1023 (Server responds to client’s control port)
• FTP server’s ports > 1023 from anywhere (Client initiates data connection to random port specified by server)
• FTP server’s ports > 1023 to remote ports > 1023 (Server sends ACKs (and data) to client’s data port)

When drawn, a passive mode FTP connection looks like this:

 

 

In step 1, the client contacts the server on the command port and issues the PASV command. The server then replies in step 2 with PORT 2024, telling the client which port it is listening to for the data connection. In step 3 the client then initiates the data connection from its data port to the specified server data port. Finally, the server sends back an ACK in step 4 to the client’s data port.

While passive mode FTP solves many of the problems from the client side, it opens up a whole range of problems on the server side. The biggest issue is the need to allow any remote connection to high numbered ports on the server. Fortunately, many FTP daemons, including the popular WU-FTPD allow the administrator to specify a range of ports which the FTP server will use. See Appendix 1 for more information.

The second issue involves supporting and troubleshooting clients which do (or do not) support passive mode. As an example, the command line FTP utility provided with Solaris does not support passive mode, necessitating a third-party FTP client, such as ncftp.

With the massive popularity of the World Wide Web, many people prefer to use their web browser as an FTP client. Most browsers only support passive mode when accessing ftp:// URLs. This can either be good or bad depending on what the servers and firewalls are configured to support.

 

 

The following chart should help admins remember how each FTP mode works:

Active FTP :

command : client >1023 -> server 21

data : client >1023 <- server 20

 

Passive FTP :

command : client >1023 -> server 21

data : client >1023 -> server >1023

A quick summary of the pros and cons of active vs. passive FTP is also in order:

Active FTP is beneficial to the FTP server admin, but detrimental to the client side admin. The FTP server attempts to make connections to random high ports on the client, which would almost certainly be blocked by a firewall on the client side. Passive FTP is beneficial to the client, but detrimental to the FTP server admin. The client will make both connections to the server, but one of them will be to a random high port, which would almost certainly be blocked by a firewall on the server side.

Luckily, there is somewhat of a compromise. Since admins running FTP servers will need to make their servers accessible to the greatest number of clients, they will almost certainly need to support passive FTP. The exposure of high level ports on the server can be minimized by specifying a limited port range for the FTP server to use. Thus, everything except for this range of ports can be firewalled on the server side. While this doesn’t eliminate all risk to the server, it decreases it tremendously.

 

Other references:

FTP: File Transfer Using Perl

http://www.foo.be/docs/tpj/issues/vol1_3/tpj0103-0007.html

http://aplawrence.com/Unixart/perlnetftp.html

http://perldoc.perl.org/Net/FTP.html

Read Full Post | Make a Comment ( 2 so far )